top of page
This site was designed with the
.com
website builder. Create your website today.Start Now

 Journal Paper): * Corresponding Author 

 

  1. Chin-Tai Chen* and Tzung-Wei Tsai, "Multilayer Polymer Light Guides Integrated with Refractive Microlenses and Liquid by Micromolding and Inkjet Printing," Submitted to Sensors and Actuators A. Physical, 2015. (SCI, IF=1.903)

  2. Chin-Tai  Chen*  and  Cheng Huang,  ''Evaporative Evolution and Internal Flow of Suspended Nanoliter Drops Visualized Through Infrared Thermograpgy and Visible Cameras,'' Submitted to Microfluidics and Nanofluidics, 2015. (SCI, IF=2.665)

  3. Chin-Tai Chen* and Cheng-Chih Huang, " Formation  and Pattern  of  Micro  Sprays  Through Electroformed  Multi-Nozzle  Arrays  of   Piezoelectric   Fluidic   Actuators , "  Submitted   to Microfluidics and Nanofluidics, 2015.

  4. Yu-Yang Chou and Chin-Tai Chen* ,"Graphical user interface for simultaneously controlling and measuring motion speeds of a walking robot using a Hall-effect sensor,"Submitted to Robotics and Autonomous Systems, 2015.

  5. Chin-Tai Chen*   and  Wen-Che Sun ,  " Conveyance  of  helium-neon , polymer  liquid  and polystyrene(PS)  beads through microoptofluidic channels of  polydimethysiloxane(PDMS)," Microfluidics and Nanofluidics, Published onlince, 2015.(SCI,IF=2.665)   

  6. Cheng-Chung Lee and Chin-Tai Chen* ,"A biaxial movable printing platform developed for spraying liquids and patterning thin films," Submitted to Smart Science, 2015. (Special Section: Chiuan-Yan Technology Thesis Award)

  7. Bing-Chun Hu,Rei-Hong Weng,Chin-Tai Chen*,"Silver conducting lines of dye-sensitized solar cells printed onto commercial building tiles,"Procedia Engineering,Vol.79,pp.267-272,2014.(EI)

  8. Chin-Tai  Chen*  and Hsun-You  Wang,"Droplet generation and evaporative cooling using micro piezoelectric  actuators  with  ring-surrounded  circular  nozzles," Microsystems  Technologies, Published online,2014(SCI, IF=0.952)  

  9. Chin-Tai Chen* and Hsiang-Pi Huang, ”Formation, releasing and assembly of non-evaporative photocurable liquid through micro molding and inkjet printing,” Journal of Micromechanics and Microengineering , 23(2013). 095009(8pp).(SCI, IF=1.725)

  10. Guo-Wei Huang and Chin-Tai Chen*,”Microfluidic Chips for Guiding Lights Through Micro Polymeric Channels Injected with Photopolymer Liquids,” Micro & Nano Letters,Vol.7,pp.1080-1083,2012.(SCI, IF=0.944)

  11. Chin-Tai Chen* and Chun-Te Chuang, ”Micro Droplets of Red Photoresist Inkjet-Printed onto Commercial Black-Martix Glasses,” Micro & Nano Letters, Vol.7, pp. 733-735 (2012). (SCI, IF=0.944)

  12. Chin-Tai Chen* and Kun-Ze Tu,”Inkjet printing of individual Polymer micro parts self-shaped with hemispherical caps,” Sensors and Actuators A. Physical. Vol. 188, pp. 367-373(2011).

  13. Chin-Tai Chen* and Kun-Ze Tu,”Morphologies of Conductive Looped Liquid Lines Inkjet-Printed on Substrate Surfaces,”  J. Micromechanics Microengineering,22 (2012), 055001 (11pp). (SCI,IF=2.281)

  14. Chin-Tai Chen*, Ching-Long Chiu, Chung-Yi Hsu, Zhao-Fu Tseng, and Chun-Te Chuang, “Inkjet-printed polymeric microstructures in n-sided regular polygonal cavities, ” Journal of Microelectromechanical Systems, vol.20,issue.4,pp.1001-1009,2011. (SCI, IF=1.964).

  15. Chin-Tai Chen*, Kuo-Hua Wu, Chun-Fu Lu, and Fanny Shieh, “An inkjet printed stripe-type color filter of liquid crystal display,” J. Micromechanics and Microengineering, 20, 055004, 11pp, 2010. (SCI, IF=1.930)

  16. Chin-Tai Chen*, Zhao-Fu Tseng, Chin-Long Chiu, Chung-Yi Hsu, Chun-Te Chuang, “Self-aligned hemispherical formation of microlenses from colloidal droplets on heterogeneous surfaces,” J. Micromechanics and Microengineering, 19, 286280, 9pp, 2009. (SCI, IF=1.930)

  17. Chin-Tai Chen, Ching-Chang Chieng, and Fan-Gang Tseng*, “Self-formation and release of arbitrary-curvatured structures utilizing droplet deposition and structured surface”, J. Micromechanics and Microengineering, 18, 025009, 12pp, 2008. (SCI, IF=1.930)

  18. Chin-Tai Chen*, Chin-Long Chiu, Zhao-Fu Tseng, Chun-Te Chuang, “Dynamic evolvement and formation of Refractive Microlenses Self-assembled from Evaporative Polyurethane droplets”, Sensors and Actuators A: Physical, 147, pp. 369-377, 2008. (SCI, IF=1.348)

  19. Chin-Tai Chen, Ching-Chang Chieng, Fan-Gang Tseng*, “Uniform solute deposition of evaporative droplet in nanoliter wells,” Journal of Microelectromechanical Systems, vol.16, no.5, pp.1209-1218, 2007.(SCI, IF=1.964)

  20. Chin-Tai Chen*, Fan-Gang Tseng, Ching-Chang Chieng, “Evaporation evolution of volatile liquid droplets in nanoliter wells,” Sensors and Actuators, A: Physical, vol.130-131, pp12-19, 2006.(SCI, IF=1.348)

  21. Ching-Long Chiu* and Chin-Tai Chen, “ The concept and prototype system of medicine-jet capsule endoscope,” Optical and Quantum Electronics, vol.37, no.13-15, pp1447-1456, 2006. (SCI, IF=0.718)

  22. Chin-Tai Chen*, Chung-Yi Hsu, and Chin-Long Chiu, “Striped droplet deposition on patterned surfaces using inkjet-printing method,” Tamkang Journal of Science and Engineering, Vol. 10. No. 2, pp.107-112, 2007. (EI)

  23. Chin-Tai Chen* and Han-Wei Su, “Experimental study of microlens fabrication using polyvinyl alcohol solution,” Tamkang Journal of Science and Engineering, Vol. 7. No. 2, pp.119-122, 2004. (EI)

  24. 陳錦泰*、伍國華、張惠珍、胡紀平、陳以哲, “噴墨法彩色濾光片可行性分析研究,”光電工程季刊, 75期, pp.11-15, 2001.

  25. 陳錦泰*、張惠珍、楊慈雅、邱顯澧、袁宏彥、陳耿銘、賴建彰、陳以哲、黃友澤, “寬尺寸噴墨列印技術開發,”光電工程季刊, 75期, pp.5  -10, 2001.

  26. 陳錦泰*，“一種系統化的遠端墨水容器設計方法與架構,” 光電工程季刊,66期, pp.47-53, 1999.

Conference Paper : 

  1. 陳錦泰*、胡秉淳，”噴印二氧化鈦光電極及其染料敏化太陽能電池製作，” 2015新世代太陽能電池先進技術研討會，中央大學，中壢，Sep.，2015.

  2. 李正中、陳錦泰*，"具影像定位輔助雙軸控制平台開發及其噴塗微奈米薄膜材料應用，"第四屆全研科技論文獎，屏東，Nov.1，2014.

  3. 周郁揚、陳錦泰*，"視窗化控制介面設計及機器人步進實況監控應用，"中國機械工程學會第三十一屆全國學術研討會，逢甲大學，Dec.6~7，2014.

  4. 楊坤霖、陳錦泰*，"軟性葡萄糖生物感測器奈米銀電極設計與噴印，"中國機械工程學會第三十一屆全國學術研討會，逢甲大學，Dec.6~7，2014.

  5. 劉冠辰、紀力瑋、葉尚蛟、陳錦泰*，“微型壓電片高頻振動控制與供水霧化量研究，” 第十八屆奈米工程暨微系統技術研討會，南台科大，台南，Aug. 21~22，2014.

  6. 胡秉淳、陳錦泰*，“印製可撓式染料敏化太陽能電池，”第十八屆奈米工程暨微系統技術研討會，南台科大，台南，Aug. 21~22，2014.

  7. 孫偉哲、陳錦泰*, “可撓式微流體光導晶片,”中國機械工程學會第三十屆全國學術研討會, 宜蘭大學, Dec. 6~7, 2013.

  8. 周郁揚、王輝騰、林峻吉、陳錦泰*, “步行機器人步態分析設計與製作,”中國機械工程學會第三十屆全國學術研討會, 宜蘭大學, Dec. 6~7, 2013.

  9. 翁瑞鴻、陳錦泰*, “噴印製作壓阻式奈米銀金屬應變感測器,” 中國機械工程學會第三十屆全國學術研討會, 宜蘭大學, Dec. 6~7, 2013.

  10. 吳嘉鏞、黃正智、陳錦泰*，“結合微深孔片與流體腔體之雙層微電鑄製程研究，”第十七屆奈米工程暨微系統技術研討會，逢甲大學，台中，Aug. 22~23，2013.

  11. Hsiang-Pi Huang, Tzung-Wei Tsai, and Chin-Tai Chen*, “Formation and Release of Micro Objects Self-Assembled from Photocurable Liquid by Molding and Inkjet Printing,” IEEE-NEMS 2013, Suzhou, CHINA, April 7-10, 2013   

  12. Jheng-Jhin Huang and Chin-Tai Chen*, “Microelectroforming of a Nickel Plate Featured with Anti-Stiction for a Piezoelectric Atomizer,” IEEE-NEMS 2013, Suzhou, CHINA, April 7-10, 2013

  13. 黃相弼、蔡宗瑋、陳錦泰*，“利用微齒輪在微流道裡形成紊流混合研究”，中國機械中國工程學會第二十九屆全國學術研討會，中山大學，高雄市，Dec. 7~8，2012

  14. Guo-Wei Huang, Tuz-Yi Hung, and Chin-Tai Chen*, “Design, Simulation, and Verification of fluidic Light-Guide Chips with Various Geometries of Micro Polymer Channels,” IEEE-NEMS 2012, Kyoto, JAPAN, March 5-8, 2012.

  15. Hsun-You Wang, Cheng Huang, Chin-Tai Chen*, “Specific Design and Implementation of Piezoelectric Droplet Actuator for Evaporative Cooling of Free Space,” IEEE-NEMS 2012, Kyoto, JAPAN, March 5-8, 2012.

  16. 黃正智、吳忠縉、陳錦泰*，”微滴蒸發冷卻系統之降溫實驗研究”，中國機械工程學會第二十八屆全國學術研討會，中興大學，台中市，DEC. 10~11,2011。

  17. Kun-Ze Tu, Guo-Wei Huang, and Chin-Tai Chen*, “Inkjet printed and sintered conductive silver lines on flexible polymeric substrates,” The 12th Electronic Circuits World Convention (ECWC12), Taipei Taiwan, NOV 9~11, 2011.

  18. 黃國維、洪慈憶、杜昆澤、陳錦泰, “微光導流體晶片之幾何設計、模擬並與驗證”, 第十五屆奈米工程暨微系統技術研討會, 台北科技大學, 台北市, Sep. 6~7, 2011.

  19. 王勛佑、黃鉦、陳錦泰, “壓電式微液滴致動器設計、製作與驗證”, 第十五屆奈米工程暨微系統技術研討會, 台北科技大學, 台北市, Sep. 6~7, 2011.

  20. K.Z. Tu and C.T. Chen*,  ”Polymeric droplet deposition and self-release forming micro parts on heterogeneous surfaces,”Transducers’11, Beijing, China, June 5-9,2011.(Accepted)

  21. Kun-Ze Tu and Chin-Tai Chen*,”Dynamic Evaporating Evolution of Profiles for Micro Droplets on Flat Surfaces with Hydrophilic and Hydrophilic and Hydrophobic Treatments,”the 6th IEEE International Conference of Nano/Micro Engineered and Molecular Systems(NEMS2010),Kaohsiung,Taiwan,Feb.20-23,2011.

  22. 杜昆澤、陳錦泰,“基材表面親疏水性對微液滴蒸發行為之影響,”第十四屆奈米工程暨微系統技術研討會, 中山大學, 高雄市, Sep. 2-3, 2010.

  23. 杜昆澤、陳錦泰,“噴印高分子於微結構裡之固化輪廓成形性探討,”第十四屆奈米工程暨微系統技術研討會, 中山大學, 高雄市, Sep. 2-3, 2010.

  24. Chin-Tai Chen, Chung-Yi Hsu, Ching-Long Chiu and Chun-Te Chuang, “Polygonal microstructures self-assembled from evaporating picoliter droplets in micro cavities,”the 5th IEEE International Conference of Nano/Micro Engineered and Molecular Systems (NEMS2010), Xiamen, China, Jan. 20-23, 2010.(EI)

  25. Chun-Te Chung and Chin-Tai Chen, “2D-Dynamic and 3D-Static Profiles of Transparent and Curved Micro-scale Liquid/Solid Objects Using the Confocal-Laser-Scanning Method, ” 中國機械工程學會第二十六屆全國學術研討會論文集, 成功大學, 台南市, Nov. 20 -21, 2009. 

  26. Chin-Tai Chen, Fan-Gang Tseng, Ching-Chang Chieng, “Solute deposition formed by liquid droplet evaporation in a nanoliter well,” The 2nd International Symposium on Micro & Nano Technology (ISMNT-2), Taiwan, pp.143-146, 2006.

  27. Chin-Tai Chen, Fan-Gang Tseng, Ching-Chang Chieng, “Uniform nanoliter solute deposition by the control of droplet profile during evaporation with micro well,” 19th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2006), Turkey, pp.190-193, 2006. (EI)

  28. Ching-Long Chiu, Yung-Fa Huang, Yen-Wen Sha, Zhao-Fu Tseng, Chin-Tai Chen, “ The application of the inkjet technology in capsule endoscope,” International Conference on Digital Printing Technologies (NIP21) -21st International Conference on Digital Printing Technologies, p 299-301, USA, 2005.(EI)

  29. Chin-Tai Chen, Ching-Long Chiu, Yen-Wen Sha, Yung-Fa Huang, Zhao-Fu Tseng, Chun-Te Chung, “Design and fabrication of microlens array by solvent-type polymer of inkjet printing,” Digital Fabrication 2005 Proceedings, p 154-156, USA, 2005.(EI)

  30. Chin-Tai Chen and Zhao-Fu Tseng, “Hybrid digital fabrication method coupled with inkjet printing and photolithography,” Digital Fabrication 2005 Proceedings, p 105-108, USA, 2005. (EI)

  31. Chin-Tai Chen, Fan-Gang Tseng, Ching-Chang Chieng, “Evaporation evolution of volatile liquid droplets in nanoliter well array,” TRANSDUCERS '05, - 13th International Conference on Solid-State Sensors and Actuators and Microsystems, p 812-815, Korea, 2005. (EI)

  32. Ching-Long Chiu, Yong-Long Lee, Chin-Tai Chen, “The prototype system of medicine-jet capsule endoscope,” Second Asian and Pacific Rim Symposium on Biophotonics - Proceedings, APBP 2004, p 211-212, USA, 2004. (EI)

  33. Chin-Tai Chen, Ching-Long Chiu, Sz-Sheng Chen, “Simulation and experiment of micro-lens fabrication using droplet deposition method,” Proceedings of IS&T's NIP20: International Conference on Digital Printing Technologies, p 265-268, USA, 2004. (EI)

  34. Chin-Tai Chen, Chin-Long Chiu, Ji-Bin Horng, “Design and fabrication of microlens by microfluidic deposition method,” Proceedings of SPIE - The International Society for Optical Engineering, vol.5523, Current Developments in Lens Design and Optical Engineering V, p 321-329, USA, 2004. (EI)

  35. Chin-Tai Chen, “Experimental and numerical study of thin-film formation by microfluidic deposition method,” Proceedings of SPIE - The International Society for Optical Engineering, vol.5519, Organic Light-Emitting Materials and Devices VIII, p 255-262, USA, 2004. (EI)

  36. Chin-Tai Chen and Han-Wei Sun “Experimental study of microlens fabrication using polyvinyl alcohol solution,” Tamkang Journal of Science and Engineering, vol.7, no.2, p 119-122, 2004. (EI)

  37. Ching-Long Chiu, Chiu-Lin Wu, Jinn-Cherng Yang, Chin-Tai Chen, Huen-Ling Chen, Mon-Da Yang, Ching-Yi Mo, Chi-Bin Lo, Chun-Jung Chen, “The Simulation of the Viscosity and Surface Tension for the Inkjet Print Head,” Proceedings of IS&Ts NIP19: International Conference on Digital Printing Technologies, 2003, p 314-318, USA, 2003. (EI)

  38. Chin-Tai Chen and Tz-Ya Yang, “ Flow Behavior of Micro Inkjet Drop on the Layer Surface of Micro Color Device,” International Conference on Digital Printing Technologies, p 776-779, USA, 2001. (EI)

  39. Chin-Tai Chen and Chien-Chang Lai, “ Influence of compression ratio of foam on printing quality of ink cartridge,” Proceedings of SPIE - The International Society for Optical Engineering, vol.4080, pp 214-221, USA, 2000. (EI)

  40. Chin-Tai Chen, “ Influence of back pressure of ink cartridge on regular operation of ink supply system,” Proceedings of SPIE - The International Society for Optical Engineering, vol.4080, pp 222-229, USA, 2000. (EI)

  41. Chin-Tai Chen, “New method of large ink supply without long tubing system for wide-format inkjet printer,” Proceedings of SPIE - The International Society for Optical Engineering, vol.4080, pp 64-71, USA, 2000. (EI)

  42. Chin-Tai Chen, “The Influence of Feeding Accuracy of Gear Train on Printing Quality for Printers,” International Conference on Digital Printing Technologies, p 52-55, USA, 1999. (EI)

  43. Chin-Tai Chen, “Ink Tank Having Visible Ink Level and End Leg For Ink Supply System of Printer,” International Conference on Digital Printing Technologies, p 59-61, USA, 1999. (EI)

  44. Chin-Tai Chen, “A New Method of Ink Level Detection for Inkjet Printers by Pressure Conditions,” International Conference on Digital Printing Technologies, p 62-65, USA, 1999. (EI)

  45. Kuo-Hua Wu and Chin-Tai Chen, “The influence of capstan roller surface characteristic on registration for thermal color printer,” Proceedings of SPIE - The International Society for Optical Engineering, vol.3422, p 218-227, Taiwan, 1998. (EI)

  46. Chung-Yi Hsu, Zhao-Fu, Chin-Tai Chen, “Design and microfabrication of Teflon lift-off patterning on glass surface,” 第十屆奈米工程暨微系統技術研討會, Taiwan, 2006.

  47. Ching-Long Chiu, Chung-Yi Hsu, Chu-Te Chung, Chin-Tai Chen, “Design and manufacture of microlens array using picoliter evaporative droplets,” 第十屆奈米工程暨微系統技術研討會, 2006.

  48. 陳錦泰， “高分子液滴在疏水基板表面乾燥固化形成圓透鏡之數值模擬計算,” 第十二屆全國計算流體力學學術研討會論文集,Taiwan, 2005.

  49. Chin-Tai Chen, Fan-Gang Tseng, Ching-Chang Chieng, “Numerical Study of Micro-Droplet Evaporation on Energy-Patterned Solid Surface,” 第十一屆全國計算流體力學學術研討會, Taiwan, 2004.

  50. Chin -Tai Chen and Han-Wei Sun, “Experimental and Analytical Study of Microlens Fabrication Using Polyvinyl Alcohol Solution,”第七屆奈米工程暨微系統技術研討會, Taiwan, 2003.

  51. Chin-Tai Chen, “Numerical and Analytical Calculation of Micro-droplet Stacking on Surface Energy Patterned Substrate,”第七屆奈米工程暨微系統技術研討會, Taiwan, 2003.

  52. Chin-Tai Chen, Jane Chang, Kevin Cheng, Chun-Fu Lu,“Study of Color Filter by Ink-jet Method,”台灣光電科技研討會暨國科會光電學門研究成果發表會(OPT01), pp.301-303, Taiwan, 2001.

  53. Chin-Tai Chen, “Numerical Calculation of Steady and Unsteady Internal Flow by Flux Split Method,” 第六屆全國計算流體力學學術研討會, pp.377-384, Taiwan, 1999.

專利:

  1. Chin-Tai Chen, Method for Manufacturing Light-Guide Device, USA patent (Pending), 2013

  2. 陳錦泰，光導體元件之製作方法，中華民國專利 2013(審查中)

  3. 陳錦泰、李新立、張平、王欽宏，”具保護片之晶圓研磨裝置及方法”，中華民國專利 I351059

  4. 陳錦泰，”利用噴墨技術製造微型元件的方法”，中華民國專利 I413585

  5. 陳錦泰，“微液滴空間冷卻系統”，中華民國專利 I386607

  6. 陳錦泰、鍾國賢，“數位微滴蒸發冷卻方法及其裝置”，中華民國專利 I390166

  7. 莊俊德、陳錦泰， “輪廓量測方法與裝置”，中華民國專利 I313346

  8. 邱慶龍、陳錦泰、曾昭富， “可即時噴藥治療及生化參數偵測之膠囊型內視鏡”，中華民國專利I311908

  9. 陳錦泰、邱慶龍、莊俊德、曾昭富，“微光學元件製作方法及其製作裝置,” 專利號: I294402(中華民國), 2008.

  10. 陳錦泰、邱慶龍、洪基彬，“微圖像的製作方法,” 專利號: I294529 (中華民國), 2008.

  11. 陳錦泰，“微透鏡之製作方法及其製造裝置,” 專利號: I224210(中華民國), 6844120(美國), 2004.

  12. 陳錦泰、呂春福、謝玉凌， “微流體製造彩色濾光片的方法,” 專利號: I175783(中華民國), ZL02101000.5(中國大陸), 6844120(美國), 2003. 【技轉LCD 彩色濾光片廠商、入圍2006 國家發明獎】

  13. 呂春福、謝玉凌、陳錦泰，“液晶顯示器的彩色濾光片,” 專利號: 196458 (中華民國), 6703173(美國), 2004 .

  14. 蘇士豪、王介文、陳錦泰、謝樹崢，“噴墨頭墨水壓力控制裝置,” 專利號: ZL00100898.6 (中國大陸), 10101370(德國), 6540341(美國), 2003 . 【技轉噴墨頭製造廠商】

  15. 陳錦泰，“流體供給裝置,” 專利號: I170430(中華民國), 6,199,974(美國), 2001.

  16. 陳錦泰，“噴墨印表機用之墨水容器及含其之供墨裝置,” 專利號: I165593(中華民國), 6,412,929(美國), 2000.

  17. 陳錦泰、伍國華，“墨水容量測量方法及其裝置,”  專利號: ZL99103143.1 (中國大陸), 2000.

專書:

  1. Chin-Tai Chen, “Microfabrication processes and applications of liquid photosensitive materials,” Book chapter,Photocured Materials,ISBN: 9781782620013, Royal Society of Chemistry,2014.[Online linked directly to the website:http://www.rsc.org/shop/books/2014/9781782620013.asp]

  2. This Intech Book Chapter’s Downloads Total: 4000 times (附件)

  3. Chin-Tai Chen, The Design, Fabrication and Applications of Micro Evaporative Droplets on Structured Surfaces, National Tsing Hua University, PhD thesis, 2007.

  4. 林昭文、龐大成、陳錦泰、徐金城，「微系統導論」數位教材(教育部認證通過)，高應大機械系，2010. http://203.64.97.3/

  5. Chin-Tai Chen, “Inkjet Printing of Microcomponents: Theory, Design, Characteristics and Applications,”Book Chapter 3, Features of Liquid Crystal Display Materials and Processes, ISBN 978-953-307-899-1,InTech - Open Access Publisher, 2011. [Online linked directly to the website:http://www.intechopen.com/articles/show/title/inkjet-printing-of-microcomponents-theory-design-characteristics-and-applications

獲獎:

  1. 光導體元件製作專利技術榮獲2014 年台北國際發明暨技術交易展銀牌獎(2014/9/22)。

  2. 指導專題學生趙晟豪、許馨方、洪亦廷之作品「輔助性機械手之動作解析與實作」榮獲102 年機械系專題競賽優勝獎(2013/12/25)。

  3. 指導學生 胡秉淳、楊坤霖、周郁揚、趙晟豪、許馨方 榮獲101 年資訊應用競賽南區工程設計技術應用競賽團體組第2名、全國第5名(2013/11/26)。

  4. 指導專題學生 趙晟豪、許馨方、洪亦廷之作品「三個傻瓜:步行機械人Virus」榮獲2013年17屆TDK盃全國大專院校創思設計與製作競賽之競賽獎第二名、創意獎特優及最佳工作團隊紀律獎三大獎項 (2013/10/14)。

  5. 指導研究生 吳嘉鏞、黃正智之作品「微模造與電鑄微型採血針之創新製程」榮獲2013 全國學生模具專題實作競賽模具產業應用與工業設計製程類組佳作(2013/9/18)。

  6. 指導專題學生 周郁揚、林峻吉、王輝騰之作品「快拆式功能平台之四足機器人」榮獲101 年機械系專題競賽優勝獎(2012/12/29)。

  7. 指導學生 翁瑞鴻、侯昭榮、林佩儀、林政佑、范揚恩榮獲101 年資訊應用競賽南區工程設計技術應用競賽團體組第3名(2012/11/26)。

  8. 指導研究生 黃相弼、蔡宗瑋、黃國維、翁瑞鴻之作品「直接澆注自組成微型零件之高分子模具設計與製作」榮獲2012 全國學生模具專題實作競賽模具設計製造與智慧型模具類組佳作(2012/9/21)。

  9. 指導研究生 黃正智、吳嘉鏞、孫偉哲之作品「LIGA-like 製模與電鑄微深孔片創新製程與應用」榮獲2012 全國學生模具專題實作競賽模具產業應用與工業設計製程類組佳作(2012/9/21)。

  10. 微型模具澆製微元件專利技術作品榮獲2012 年台北國際發明暨技術交易展銅牌獎(2012/9/22)。

  11. 微噴霧冷卻器 專利技術作品榮獲2012 年台北國際發明暨技術交易展金牌獎(2012/9/22)。

  12. 指導專題學生 陳柏叡、馮宇綸、林伯龍之作品「簡易居家復健肢體動作辨識系統」獲2012南區技專校院師生產學合作實務專題製作競賽醫療照護領域組佳作(2012/5/18)。

  13. 指導專題學生 吳宜庭、李建興、陳瑞堯之作品「微流體生物晶片製造」榮獲100 年機械系專題競賽佳作獎(2011/12/25)。

  14. 指導學生 洪慈憶、黃鉦、許馨方、謝翔鵬榮獲100 年資訊應用競賽南區工程設計技術應用競賽團體組第2名(2011/11/29)。

  15. 指導專題學生 黃正智、吳忠縉、黃啟晉、呂昶憲之作品「高節能、省水與數位控制之微液滴噴霧冷卻裝置」榮獲2011 南區技專校院師生產學合作實務專題製作競賽綠色能源組冠軍(2011/5/17)。

  16. 指導研究生 黃國維、洪慈憶、蔡宗瑋之作品「常溫下的微液滴蒸發沉績」入選2011東元科技創意競賽 Green Tech 決賽(2011/8/30)。

  17. 指導專題學生 孫偉哲、戴雨政、施敦仁之作品「手部影像之即時擷取與辨識分析」榮獲98 年機械系專題競賽第二名、工學院佳作獎(2009/12/24)。

bottom of page